TS 220

Description

Workpiece Touch Probe with cable transmission Probe accuracy- = ± 5 µm when using the standard styli Probe repeatability (repeated probing from one direction)- 2 s = 1 µm at a probing speed of 1 m/min Taper shank With taper shank (for selection see 3-D Touch Probes brochure) Without taper shank (connecting thread M30 x 0.5) Max. deflection of probe contact 5 mm in all directions Deflection forces Axial: approx. 8 N Radial: approx. 1 N Probe velocity Max. 3 m/min (23 600 ipm) Signal transmission Cable Operating temperature 10 °C to 40 °C Storage temperature 20 °C to 70 °C Power supply (without load) 5 V ± 5% Electrical Connection Spiral cable, 1.5 m with 6-pin quick disconnect Input / Output Signals One square-wave signal and its inverted signal Trigger signals SSignal levels: TTL UH =2.5 V at ?IH = 20 mA UL = 0.5 V at IL = 20 mA at 5 V rated voltage